MTH SERIES
HYDRAULIC CYLINDER - Swing Clamp Cylinders
FEATURES:
- The swing clamps are used when it is required to keep the fixture
workpiece are free of straps and clamping components for unrestricted
workpiece loading and unloading.
- This hydraulic clamping element is a pull type cylinder. There are five
standard sizes, and for each size two versions of standard clamping arms,
mounting of these clamping arms at any angle within 360.
NOTE:
- Pleas don't exceed 1.5 tims of the original length, if it is necessary
to increase the lenght of the clamping arm.
- Suggested to install a flow control valve protect cylinder barrel
and internal components against fretting wear.
 |
SPECIFICATION
| MODEL |
MTHS, MTHD |
| I.D. (mm) |
25,32,40,50,63 |
| Operation |
Double acting |
| Power fluid |
Filtered oil |
| Max. Pressure(MPa) |
10(100 kgf/cm2) |
| The range of pressure (MPa) |
0.5~7 (5~70 kgf/cm2) |
| Material of cylinder barrel |
Carbon steel |
| Standard angle of rotation |
90o±2o(Angle of 0o, 45o and 60o are optional) |
| Rotating direction |
Clockwise or counter clockwise |
|
ORDER EXAMPLE:
MTH
(1)
|
-
|
25
(2)
|
-
|
CW
(3)
|
-
|
90
(4)
|
(1) MODEL:MTHS , MTHD
(2) BORE
(3) ROTATING DIRECTION
CCW:Counter clockwise
CW:Clockwise
(4) Rotating Angle
