MTA

MTA* SERIES
STANDARD CYLINDERS -
Swing Clamp Cylinders

FEATURES:

These swing clamps are used when it is required to keep the fixture workpiece area free of straps and clamping components for unrestricted workpiece loading and un-loading.

This pneumatic clamping element is a pull type cylinder. There are five standard sizes, and for each size two versions of standard clamping arms, mounting of these clamping arms at any angle within 360.

NOTE:

Pleas don't exceed 1.5 tims of the original length, if it is necessary to increase the lenght of the clamping arm.
Suggested to install a flow control valve protect cylinder barrel and internal components against fretting wear.

SPECIFICATION

MODEL	MTAS	MTAD
I.D. (mm)	25,32,40,50,63	32,40,50,63
Operation	Double acting
Power fluid	Filtered air with or without lubrication
Max. pressure (MPa)	1.47
The range of pressure(MPa)	0.1~1.03
Material of cylinder barrel	Anodised aluminium alloy
Standard angle of rotation	90^o±2^o(Angle of 0^o, 45^o and 60^o are optional)
Rotating direction	Clockwise or counter clockwise

ORDER EXAMPLE:

MTAS
(1)

25
(2)

CW
(3)

90
(4)


(1) MODEL:MTAS , MTAD
(2) BORE
(3) ROTATING DIRECTION
     CCW:Counter clockwise
     CW:Clockwise
(4) ROTATING ANGLE
     90^o -Standard rotation